Jaw crusher selection Jaw crusher has cast steel casing and welded casing. The cast steel casing is strong and durable and not easy to deform, but the surface is rough and not beautiful enough, so it is suitable for crushing hard ores. The welded casing is beautiful and elegant, with a smooth surface and is easy to clean. It is suitable for use in situations with high environmental requirements. However, the welded casing is easy to deform and has insufficient stiffness, so it is more suitable for crushing brittle materials. When choosing a jaw crusher, in addition to considering the production scale, you must also consider the size of the raw materials, and also consider whether the capabilities of other supporting equipment match. Working Principle of Jaw Crusher The jaw crusher produced by Shanghai Gouda Machinery has a crushing method of curved extrusion type. The motor of the jaw crusher drives the belt and pulley to move the movable jaw up and down through the eccentric shaft. When the movable jaw rises, the jaw crusher moves up and down. The angle between the plate and the movable jaw becomes larger, thus pushing the movable jaw plate closer to the fixed jaw plate. At the same time, the material is squeezed, rubbed and crushed in multiple crushing processes. When the movable jaw moves downward, the angle between the toggle plate and the movable jaw plate becomes smaller. , the movable jaw leaves the fixed jaw plate under the action of the tie rod spring. At this time, the crushed materials are discharged from the lower opening of the crushing chamber. As the motor continuously rotates, the movable jaw of the crusher performs periodic crushing and discharge, realizing mass production.
Structure of jaw crusher
PE600*900 Jaw Crusher | Jaw Crusher | Jaw Crusher | Tongwang Machinery